Hi Guys, I have a PC with a HDD gone bad. I have purchased a new solid state to replace it but kept getting g error messages when trying to clone the original disk. This was something I though might happen so decided to remove the drive and try boot the new drive with a new OS install from a recovery USB. This gave me an error as well saying files were missing? I made a new recovery usb and still the same issue. did a check on the RAM and got a fault with that, so I swapped it with another PC’s ram that I know works and still get the same errors. I’m pretty much at the end of my knowledge here, could this be a mother board issue? Any advice much appreciated