I have a MOTOROLA ONE POWER XT1942-2 and I think I may have bricked it. Initially it was booting into the OS, bootloader unlocked (and it still is as of now).

The issue was that while flashing, I think I may have messed up the boot, recovery and a/b partitions as it shows nothing whenever I try to flash a custom recovery

I thought fine, I’ll flash the stock rom and lock the bootloader again Initially it was stuck at “sending partition…. (XXX KB)” So I decided to use a hub and use a flash bat firmware (both 8.1.0 and 10) and it was then getting stuck at “sending bootloader…. (XXX KB)”

Now if I try to boot into anything, factory mode or qcom or the os or recovery, it boots me back to the bootloader.

This phone holds sentimental value and I’d do anything to save it. Also rescue and smart assistant isn’t working, without a hub it’s exiting on its own saying “successfully exited rescue” and with a hub it’s failing to flash the bootloader. Trying to automatically read or selecting the models from the list says that the firmware doesn’t match shipping values. If I try to switch slots it says device doesn’t support slots.

PLEASE HELP!!!

edit: using rescue and smart assistant, and using a usb hub, I get stuck on this, and then get an error saying "Fastboot flash partition failed". Using other cables makes the rescue stuck on 18%, and then exits on its own, saying "you have successfully exited the rescue".

https://preview.redd.it/3p8d0tnm225d1.png?width=1297&format=png&auto=webp&s=91516b8ed1ee462d31abaa70b5753cee958211b5