Hey there /r/MechMarket! I'm looking to sell some boards to get some christmas money to buy some gifts for family and a little something for myself, so here goes!

Timestamps: Klippe - https://drive.google.com/file/d/1o7p_f56iEEG0HHpH_BoS7xaPeLwolw4C/view?usp=sharing KBD67v2MKII - https://drive.google.com/file/d/16rIhHz73qKAr3kxIwmsXyvn7QoEXaUyN/view?usp=sharing

Typing Samples: Klippe - https://drive.google.com/file/d/1GRsY_Yy74eH0u8ziHT7zbEWaQEqy9X_p/view?usp=sharing KBD67v2MKII - https://drive.google.com/file/d/1f1bhAWkcSl00iyNe9nqkejQYG00_PuEH/view?usp=sharing

Klippe - $325

Things you should know about the Klippe-- Built with 62g Zealios filmed, and lubed with Krytox 205g0, Plate and Case Sourbothane, Lubed Zeal Stabilizers. Full transparency, there are some cosmetic marks on the inside of the case near the front that would not be visible with caps on, and are quite small. The brass plate is also a bit oxidized, but again, you would not see this with caps on at all. The apostrophe key is also a little strange, as in it feels slightly gunky, so I'd recommend taking it apart and desoldering to figure out what is going on there. Other than that, to my knowledge, the board is perfectly fine.

KBD67v2MKII - $325/ brass plate $350

What you should know about the KBD67v2MKII-- Built with an FR4 Plate, U4T Boba Switches lubed with Tribosys 3204, Two layers of dampening foam. If you'd prefer a brass plate, I can sell the brass plate alongside the build for a slight price increase. There are some issues with the board. Some of the screws are stripped, and when lubing the spacebar I used a little too much lubricant and it feels a little gunky as a result. Since this is hot swap, it can easily be fixed by cleaning up the stabilizer and relubing it. Other than that, the board is pretty great.

Looking forward to doing business with you guys! Please post before PMing. <3 If you have any questions, feel free to ask! Only shipping to the US.