Hi all! I have had my cage for a few months now and thought it'd be beneficial to post a tutorial for new users, or to just share my own personal process if it helps anyone else. I know there are other tutorials out there, so I wanted to add to the mix! I hope this helps anyone curious! Notes: I am using a Cobra N Cage Regular with a Size 5 Standard Ring and circumcized penis. My cage is slightly large on me at certain points of the day. My ring is comfortable. Your results may differ from mine and this is for demonstration purposes. All images are of myself and my own process.

1. Cover picture of my Cobra Cage. N Cage Regular with a Size 5 Standard Ring.
2. Begin with a flaccid penis. This was a challenge at first, but be cautious not to use too much force during the process. During cage assembly, note Amy discomfort or irritation. You know your body best!
3. Place the ring over your balls. I typically work one at a time through the ring. Pull a bit of your scrotum through before working your balls through so they have some play room. Slide the ring up where your balls are fully through the ring.
4. Tuck your penis through the ring so the back of the ring is flush with your pelvis. If it feels too tight or unbearably uncomfortable, you should consult your ring sizing guide.
5. Ring fully seated.
6. Place the cage over your penis and line up the locking mechanism and two tabs on the top at each side. Make sure skin is clear as your push the tabs of the cage into the slots on the ring. I try to line up one side at a time pushing the scrotum down and away.
7. Make sure the top cage to ring lock is fully seated in or the lock will not go in properly.
8. Insert the lock mechanism into the lock receiver. Note that the key position must be cuch that the tabs are lining up on the lock. The key should not be able to be removed in this position.
9. Push the lock the remainder of the way in. At this point you will know if for some reason the cage to ring connection is not fully seated. The lock may need gently inward pressure to seat fully. Twist the key and remove the key from the lock. Place keys in a safe place.
10. Align the head of the penis fully in the lower area of the cage. I personally carry cotton swabs (Q-Tips) with me during the day. I find it east the push the head of the penis into a proper seated position before urinating. The head of the penis should fit comfortably in the raised head area of the cage.
11. The cage is fully on and assembled. Note the tip of the penis is aligned with the bottom center opening of the cage. I have found this the most beneficial when sitting down and urinating.