SOLVED

​

Used the V_Bat bridge to power the VTX instead of using the V_BAT Pad as this pad doesn't supply any voltage.

​

​

​

This is a third installment on my 3 week fpv sh*t fest.

My life has been fixing issues related to vtx's and wiring nightmares. I want my kitchen table back one can only live on takeout for so long.

All jokes aside,

I finally was able to make a plug to connect my ESC to FC and now my VTX doesn't work doesn't light up or anything.

​

So I have a Zeez f7 flight controller and a Succex (more like sucks) Force 5.8 ghz VTX

​

Attached are the wiring diagrams for the vtx and FC I am using I assume that I don't need the ground for the cam or the 5v out since I am connecting the cam to the FC.

​

​

I initially wired the vtx to the U3_tx for the rx

GND to the far right

Vid to video out

and 7-36v to V_vtx

and this didn't light up.

here's the FC: https://blog.seidel-philipp.de/zeez-f7-flight-controller-anschlussplan-wiringplan/?fbclid=IwAR3AoTDPXyHk9-RL5jgdNvBFkQfdquGeM0m0pdCRBznrlC-d4X8lLStF7kM

​

here's the vtx: https://shop.iflight-rc.com/image/catalog/product/800mW-vtx/SucceX-Force-800mW-2.jpg