This is my first time making a "big" order from Tayda so I'll need someone to help me figure out if I missed anything or if I should remove some things. Keep in mind I'll mostly be building just drive/fuzz pedals.

​

Resistors

1/4w metal film

10 ohm - 10

100 ohm - 10

220 ohm - 10

330 ohm - 10

470 ohm - 10

510 ohm - 10

1k - 30

1.2k - 10

2.2k - 10

3.3k - 10

4.7k - 20

5.1k - 10

6.8k - 10

8.2k - 10

10k - 30

22k - 10

33k - 10

47k - 10

100k - 30

220k - 10

510k - 10

1m - 30

2m - 30

2.2m - 10

​

Capacitors

Electrolytic

1uf - 10

2.2uf - 10

3.3uf - 5

4.7uf - 5

10uf - 10

22uf - 10

33uf - 5

47uf - 10

100uf - 10

220uf - 5

Polyester mylar film

1nf - 20

1.5nf - 5

2.2nf - 5

3.3nf - 5

4.7nf - 5

10nf - 30

22nf - 10

33nf - 5

47nf - 5

68nf - 5

100nf - 30

220nf - 5

Ceramic disk

47pf - 30

100pf - 20

220pf - 10

500pf - 10

​

Diodes

1n4001 - 30

1n5817 - 10

1n4148 - 30

​

Op-Amps

Tl072 - 10

​

Transistors/JFETs

2n3904 - 20

2n3906 - 20

2n2222 - 5

Bc108 - 10

Bc109 - 5

J201 - 10 (out of stock)

Sockets

DIP8 - 10

40 PIN - 5

​

LED/Bezel

3mm red - 10

3mm green - 10

3mm bezel - 20

​

Switches

3pdt footswitch - 5

3pdt switch on/on - 5 (out of stock)

​

Jacks and stuff

6.35mm ¼” mono phone jack - 10

6.35mm ¼” stereo phone jack - 5

DC power jack 2.5mm - 10

9v battery clip - 5

​

Wire

AWG 24 Blue 30 cm stranded - 10

AWG 24 Yellow 30 cm stranded - 10

AWG 24 Green 30 cm stranded - 10

AWG 24 White 30 cm stranded - 10

AWG 24 Red 30 cm stranded - 10

AWG 24 Black 30 cm stranded - 10

​

Potentiometers (6.35 solid shaft)

Linear

1k - 10

5k - 10

10k - 10

50k - 10

100k - 10

​

Here's my questions:

1. Does it REALLY matter if a pot is logarithmic or linear as long as it gets from point A to point B?
2. I've heard that I should stay away from "green caps" (polyester mylar film), should I change those to the polyester film box type? Keep in mind I will mostly be using stripboard so idk if that would make a difference.
3. Are there any good alternatives to J201s?
4. The only OpAmp on my list is a Tl072, what else should I get if anything?
5. I'll be making mostly drive/fuzz pedals and I already have around 20 bc108s, should I add or remove any transistors to my list?
6. Is AWG 24 stranded the best wire for this type of stuff or is solid core better?
7. Final question - is there anything in general that I've missed besides enclosures or does my list look pretty good? Thanks.