“Sigil Signals”

Name: Sigil Signals

Type: Manipulation; Emission

The user of this Hatsu is able to infuse their aura into paper seals, enabling them to pre-program each sigil with basic and complex commands based on the user’s will and conditions. The user can only infuse their aura with paper seals.

Conditions: 1. The user must think and repeat the desired command 3x uninterrupted while touching the blank sigil with the palm of their hand. (Once this is done an Aura sigil will form on the paper seal with a number of 1-19)

1. Next, to apply a sigil to a Target, the user must press and hold the sigil to the target for at least 3-5 seconds.

2. Before activating a command the user must say “initiate x(numbered sigils)”, referring to whichever of the sigil the user intends to trigger.

Limitations:

1. Only a total of 19 sigils can be created and exist simultaneously at once.

2. To release a Sigil, the user must touch it with the same hand, for the same amount of time used to apply it.

3. Sigils can be applied to living and inanimate objects but only through paper seals which physically exist and cannot be conjured.

Only up to 19 sigils can be created at a time. If a sigil is destroyed, another can be created from a new paper seal but no more than 19.

In order for a target to remove a sigil they must make physical contact with the user for at least 3 seconds.

Sub Ability: Void Jump

Description: The user imbues aura into up to 10 seals preprogramming them with a marking/command to act as a “Sender/Receiver” of my aura, amongst sigils that hold the same command. Only up to 1-10 of the 19 limited capacity sigils can hold this command at a time.

Up to 10 seals can only be imbued with this command. Each sigil has a 15 ft sq radius range that cannot be exceeded unless they decrease the number of sigils, therefore adding to the range they can travel.

The User utilizes this ability by attaching them to throwing knives, giving them a mobile and swift style using teleportation through each sigil.

EX: 10 Seals = 15sq ft per seal receiver range

3 Seals = 50sq ft per seal receiver range

Limitations:

1. The user can only imbue up to 10 sigils with this command.

2. Each sigil has a 15 ft sq radius, which will not work/activate conditions beyond that.

Sub Ability: Disruption

Description: The user imbues a Sigil with a command to “Disrupt” the target’s Aura nodes via emitting aura and manipulating the aura, attacking nearby Aura nodes.

Conditions:

1. To trigger the effect of the sigil, the user must make striking impact with the target.