Hey r/FixMyPrint community,

I'm encountering some frustrating wrapping issues with my 3D prints and could really use some assistance. I've tried troubleshooting on my own, but haven't been able to find a solution. Here are the details:

Printer: biqu b1 Filament: polyterra Pla Print Settings: layer height = 1.2 and .8 Speed = 60 mm/s Nozzle temp =190 Bed temp = 61 Cooling system = 50%

Description of the Issue: I've just bought this filament and now I have wrapping issues, I didn't had them before (with a really cheap filament), the bed is leveled the best I can actually while printing PetG it didn't generate any wrapping, also the weird part is that happens with smaller things ...

I have attempted a few troubleshooting steps already, including:

Adjusting the print bed level and ensuring proper adhesion Using a heated bed Trying different print speeds and temperatures

Unfortunately, none of these attempts have resolved the wrapping issue. I suspect there might be something I'm missing or some settings I haven't considered.

Maybe it could be moisture in the filament but I have no idea about that just something I read somewhere

I would greatly appreciate any guidance or advice from the community on how to overcome this wrapping issue. If you have faced a similar problem or have any insights, please share them. Additionally, if you need any pictures or additional details, please let me know, and I'll be happy to provide them.

Thank you in advance for your time and assistance!