10th gen SI - Not just the skid plate torn up

So, as a lot of us have done, I tore up my oem skid plate last year and replaced it with the Badannlv BADDANNLV Skid Plate Replacement skid plate replacement; well built and highly recommend....  Well, I was hearing some noise down there again yesterday, so I went under to look and a piece of the center Cover Assembly (under the driver's seat - where the front skid plate bolts to...) was torn on the passenger side and sagging in the mid area...

I did some minor surgery, cut off the sagging corner (about one square ft), used metal zip ties to tuck up the center. The front skid plate was still sagging a little bit, b/c of all the mess down there....

Well today, I go to pull off the road and fk'ed up the front Baddanlv skid plate... and probably the piece after that (the one I cut a corner off). The corner I cut , I zip tied as well , so it wasn't the cause of the sagging today.

Anyway, I'm about done with these skid plates for a while. Has anyone had to remove the whole bottom plastic skid plate under the cabin, not just the front one we all talk about?

I got some pics of the piece...

The car is lowered on BC Coils, not slammed. The problem is the dirt road into my house, there's a dip as you approach the sidewalk...and that's where it happened, and will continue to happen .

The first pic I got from the archives just to show you what I'm talking about. That's the piece I cut the 1'x1' corner off on the passenger side.

Thoughts?