Bundled applications

• UniFi Network 7.3.83
• UniFi Protect 2.2.6
• UniFi Talk 1.17.2
• UniFi Access 1.4.11
• UID Agent 1.51.3

Improvements

• Add Load Balancing support.
• Add email validation for UI account creation during setup.
• Add Hard Drive Issues notifications to UniFi OS.
• Add visual icons for UID and Connect during backup restore.
• Add support for remote syslog.
• Add memory limits for the Network application.
• Improve compatibility with the UACC-CM-RJ45-MG module.
• Improve speedtest stability.
• Improve UX when installing and updating applications.
• Improve Remote Access connection stability.
• Improve DPI performance.
• Limit restoring local backups only from the same console model.
• Backup restore will skip restoring the backup schedule if remote access is disabled.
• Provide previous subnet information when detecting existing subnet during setup.
• Block power-off and reboot actions when applications are updating or installing.
• Auto-detect link speed for SFP ports.
• Auto update all applications if auto update is enabled for applications.
• Update integrated Access Point firmware to 6.2.36.
• Update Suricata to 6.0.5.

Bugfixes

• Fix the wrong Config Backup list after a console owner transfer.
• Fix inaccurate timezone converting causing schedule issues for Scheduled Traffic Rules.
• Fix showing false "Insert Network Cable" screen on LCM when only using WAN2 (SFP ).
• Fix Bluetooth disconnecting when setting up MAC Address Clone with the Mobile app.
• Fix gateway configuration error when using Jumbo Frames and having Port 9 set to LAN.
• Fix showing incorrect WAN IP in the UniFi OS settings after remapping WAN ports.
• Fix log rotation for firewall logs.
• Fix incorrect IP address in UniFi OS when using PPPoE.
• Fix rare kernel crashes when setting the SFP port to a fixed speed.

Known issues

• Auto-negotiation may not work when using the UACC-CM-RJ45-MG module. Instead, configure a fixed speed.

Additional information

• You must be on 2.4.27 or newer in order to update to this version, DO NOT update from 1.12.x to 2.5.x or newer.