This post has been de-listed
It is no longer included in search results and normal feeds (front page, hot posts, subreddit posts, etc). It remains visible only via the author's post history.
Alright, this ones new to me. For context the printer is an Elegoo Neptune 3, only modifications are a longer lead screw and fan shroud. I got a ruby tipped nozzle for Christmas and after putting it on my printer, releveling it, and trying to print a level test, this happened. I tried turning down the flow but that didn't help any. I'm completely stumped
1st picture is back left corner, I started raising the z-offset first, went from .21 to .27 and didn't really see a change.
2nd picture is back right, I lowered the z-offset down to .25 and flow down to 90% on this one.
3rd picture is front left, very first tile it did. This was 100% flow and .21 z-offset.
4th picture is the center, this one is the same as the 3rd picture since I was inspecting the first on it printed.
5th picture is front right, this had z-offset at .25 and flow at 80%
I've never seen such clean but clearly overextended lines like this. I'm completely stumped. Any help would be appreciated.
Image seen in 1 other post by this user.
Image seen in 1 other post by this user.
Image seen in 1 other post by this user.
Image seen in 1 other post by this user.
Image seen in 1 other post by this user.
Reposted Media Detected
One or more of the images in this post exist in 1 other post
Subreddit
Post Details
- Posted
- 11 months ago
- Reddit URL
- View post on reddit.com
- External URL
- reddit.com/gallery/18s76...